Sharing / Synchronisation

  • MISP's core functionality is sharing where everyone can be a consumer and/or a contributor/producer.
  • Quick benefit without the obligation to contribute
  • Low barrier access to get acquainted to the system

Synchronisation

Concept

The following figure shows the concept how different MISP instances could tie together.

In MISP, two ways exist to get events from remote sources:

  • Use case 1: From another MISP server (also called MISP instance), by synchronising two MISP servers.
  • Use case 2: From a link, by using Feeds.

The example below illustrate the synchronisation between two MISP servers (use case 1). An organisation B (OrgB) wants to synchronise its MISP server, called ServerB, with the MISP server of an organisation A (Org A), called ServerA. The following steps can be taken to syncronise ServerB with ServerA:


FIGURE: Illustration of the synchronisation between two MISP servers

For additional information on the synchronisation process, refer to the MISP GitHub issues, for example, issue 2595.

Adding a server

Servers can be added by users via

https://<misp url>/servers/add


The Add Server Form has several input fields:

  1. Base URL

    The base-url to the external server you want to sync with. Example: https://foo.sig.mil.be

  2. Instance Name

    A name that will make it clear to your users what this instance is. For example: Organisation A's instance

  3. Remote Sync Organisation Type

    MISP has several organisation "pools", one for local and one for known external organisations. When adding a synchronisation connection, you need to define the host organisation of the remote instance. Select which pool you wish to pick the organisation from using this drop-down. You also have the option of adding a new organisation directly from this interface.

  4. Local/Known remote Organisation

    Choose the organisation from the selected pool that defines the host organisation on the remote side. Make sure that the remote instance is actually run by the organisation you select as this is used in an integral part of the sharing mechanism. Do not select your own organisation for this setting.

  5. Authkey

    You can find the authentication key on your profile on the external server.

  6. Push

    Allow the upload of events and their attributes. That means only Events that match the given filter will be pushed to the server.

    E.g. it can limit push of events to events not being TLP:RED

  1. Pull

    Allow the download of events and their attributes from the server. That means only Events matching the given criteria will be pulled.

    E.g. it can limit to NOT download Type:OSINT events.

  2. Self Signed

    Click this, if you would like to allow a connection despite the other instance using a self-signed certificate (not recommended). (server certificate file still needed)

  3. Server certificate file

    You can also upload a certificate file if the instance you are trying to connect to has its own signing authority. (*.pem)

  4. Client certificate file

    You can also upload a certificate file if the instance you are trying to connect to has its own signing authority. (*.pem)

Test connection

Test connection can be used to test the connection to the remote server and will give a feedback about local and remote version of MISP.

Rules

Rules are used to limit sharing when synchronising events and attributes, to e.g. events with a given tag, or disabling sharing for events containing a certain Tag.

Troubleshooting

If you have issues connecting to a remote servers try to do the following things:

  • try to connect with your user account to the remote server, to ensure the password is still valid and that your API key is valid
  • try to connect with your user account to the remote server and check your roles on the remote server
  • with connection issues do a package capture to find out more
  • if you have a SSL connection issue to a remote server with a signed by a CA that is not included in OS, make sure the whole certificate path is included in the path.

Sharing and distribution

The following section describes how distribution mechanisms of events and attributes work.

Distribution settings

The below five distribution settings are available for events and attributes. Descriptions of those settings can be found here.

  • Your organisation only
  • This community only
  • Connected communities
  • All communities
  • Sharing group

Events that are not published are only distributed/shared to the local organisations on the same MISP server/instance (within the limit of the distribution model). Only events that are published will be shared with remote organisations on other MISP servers via push/pull mechanisms. More details on publishing events here.

Community

A community is composed of the local organisations on a MISP server and the remote organisations connected by the sync users. For more information on the concept of community, refer to an article on MISP information sharing following ISO/IEC 27010, explaining the concept of community.

Specifically, communities are not reversible. Taking the example of the above figure, illustrating the synchronisation between two MISP servers, OrgB.ServerB is part of the MISP ServerA community but OrgB.ServerA is not part of MISP ServerB community.

Distribution mechanisms

The distribution level of an event is automatically decreased as it is synchronised with other MISP instances, when it was originally set to:

  • Community only (to organisation only)
  • Connected community (to community only)

It is not decreased when it was originally set to:

  • Organisation only
  • All communities
  • Sharing group

[!] This rule does not apply if “Internal instance” has been checked when creating the server.

As an example, the figure below illustrates two events e and e' created by OrgA and respectively shared as "This community only" and "Connected communities" and how they propagate in an illustrative MISP set of intances synchronised with each others.


FIGURE: Illustration of MISP organisations and community interactions

Sharing-groups

There is an article about sharing groups in here

Collaboration

Proposals

Proposals can be used to propose new attribute values that can be reviewed by the event owner.

Forums / Threats

Forums can be used to discuss non event related topics.

Discussions can be accessed on the top "Global Actions - List Discussions"

Discussions will and can not be shared with other servers

and via URL:

https://<misp url>/threads/index

Create a new Topic

To create a new topic

https://<misp url>/posts/add

Comment a topic

A topic can be commented by any user

https://<misp url>/threads/view/<topic id>

Comments to events

In MISP ongoing events can be commented by every user to ask free text question to events. Comments to events will not be shared with other servers

Contact a reporter

This feature can be used to contact the person or the organisation that the person belongs to that has created the event.

All E-Mails can be enforced to be encrypted

Receive alerts

It is possible to get alerts via encrypted mail in the following cases:

These E-Mail alerts are an opt-in feature

Recommendation

The following section will describe what is the best practice how many MISP instances that showed to be good for orgs. Of course depending on your specific requirements an architecture could be more spread or simplified.

The architecture is divided into several systems / stages beginning with:

MISP Staging System

This systems purpose is to be linked to all available external MISP systems that you have access to. It will download all events and do enrichment between these events.

MISP SECOps System

This system is the main system used by human analysts. It will it is not linked to any external MISP instance other then the Staging System.

To publish events to the community assign the right tags to match your push Rules and publish the event

results matching ""

    No results matching ""